Go to Page # Page of 7

Cutting Tool Measurement with 3D Metrology

 NANOVEA | A Better Measure.
Description: In this application, we have shown how the Nanovea ST400 3D Profilometer with 12mm and 400 micron optical pen can precisely characterize both the macro surface/shape and the nanometer details of the critical cutting edge.
Views: 2029
Domain: Electronics
Category: Business
Measurement of Cutting Tool Edge With 3D Metrology

Prepared by Craig Leising

6 Morgan, Ste156, Irvine CA 92618 � P: 949.461.9292 � F: 949.461.9232 � nanovea.com
Today's standard for tomorrow's materials. � 2010 NANOVEA

Measuring the sharp edges of cutting tools is a challenging measurement because it involves a small radius which requires ... See more

Stribeck Curve Analysis Using Tribometer

When lubrication is applied to reduce the wear/friction of moving surfaces an increasing load can shift the lubrication from several regimes such as Boundary, Mixed and Hydrodynami

25 August, 2011

Micro Fastener Measurement With 3D Metrology

Advances in Microelectronics, Biomedical and many others has grown the demand for micro manufacturing, or micromachining, of fastener components at smaller, more precise sizing on

25 August, 2011

Breakthrough Indentation Yield Strength Test

Nanovea today introduced its patent pending breakthrough method of reliably acquiring yield strength through indentation; ultimately replacing the traditional tensile testing machi

19 July, 2011