Go to Page # Page of 10
loading

Bridging Nanoindentation And Macro Tensile Testing

 NANOVEA
  15th-Dec-2009
Description: Nanoindentation can provide some of the important tensile test parameters such as elastic modulus and quantitative information on ductility. We have also shown some promising options for deriving links to parameters such as yield point and ultimate tensile strength. Further testing will be required for full correlation to tensile data but the Nanoindentation technique is definitively a powerful quantitative method of obtaining mechanical properties for thin film coatings research.
Views: 3036
Domain: Electronics
Category: Semiconductors
Contents:
Bridging Nanoindentation And Macro Tensile Testing

Prepared by Johanna Tchon

6 Morgan, Ste156, Irvine CA 92618 � P: 949.461.9292 � F: 949.461.9232 � nanovea.com
Today's standard for tomorrow's materials. � 2010 NANOVEA

INTRO:
Beginning at the end of the 19th century, thin film coatings have become a large interest in several different industries ... See more

Stribeck Curve Analysis Using Tribometer

When lubrication is applied to reduce the wear/friction of moving surfaces an increasing load can shift the lubrication from several regimes such as Boundary, Mixed and Hydrodynami

...
25 August, 2011

Micro Fastener Measurement With 3D Metrology

Advances in Microelectronics, Biomedical and many others has grown the demand for micro manufacturing, or micromachining, of fastener components at smaller, more precise sizing on

...
25 August, 2011

Breakthrough Indentation Yield Strength Test

Nanovea today introduced its patent pending breakthrough method of reliably acquiring yield strength through indentation; ultimately replacing the traditional tensile testing machi

...
19 July, 2011