Juliet Araujo
Low Risk Solution Enabled by Novellus Architecture
San Jose, Calif. – April 1, 2009 – In order to support the RC delay scaling required by the International Technology Roadmap for Semiconductors (ITRS), process designers have focused their attention on reducing the permittivity of dielectrics used in the interconnect stack. Research has shown that significant reduction in the permittivity of the overall interconnect stack can be achieved by focusing on the material properties and deposition method of the dielectric diffusion barrier. Innovative deposition and pre-treatment technologies have been developed using Novellus’ (NASDAQ: NVLS) patented multi-station sequential processing (MSSP) architecture to create ultra-thin dielectric barriers that minimize impact on RC delay while ensuring stringent electromigration (EM), dielectric breakdown, and line-to-line leakage requirements are met.
Figure 1 illustrates two options available to a process designer to achieve a 10 percent reduction in effective dielectric constant (k-effective). From a baseline k-effective value of approximately 3.3, using a dielectric barrier with k of 5.0 and a thickness of 50nm, a 10 percent reduction can be achieved either by introducing a new dielectric barrier material with a k of 3.8 or by reducing the thickness of the current dielectric barrier to 25nm. Thinning the dielectric barrier is the less complicated of the two changes, since no new materials are introduced into the integration scheme. However, ultra-thin barriers present their own deposition challenges where hermeticity and copper diffusion resistance need to be maintained at the reduced film thickness. Taking advantage of interface and bulk film controls afforded by MSSP, Novellus researchers have successfully demonstrated dielectric barriers down to 10nm thickness exhibiting the same EM, dielectric breakdown and line-to-line leakage characteristics as 50nm thick films.
The unique film properties derived from MSSP have led industry-leading manufacturers of logic and memory devices to implement dielectric diffusion barriers fabricated using the Novellus VECTOR® PECVD system. Figure 2 shows a 65nm device cross section with both dielectric diffusion barrier and contact etch stop layers deposited using the MSSP approach.
“The dielectric diffusion barrier is a critical layer in the interconnect stack due to the role it plays in determining device reliability,” said Kevin Jennings, senior vice president and general manager of Novellus’ PECVD business unit. “Novellus’ diffusion barrier films meet today’s performance needs and have been demonstrated to meet the EM and dielectric breakdown requirements for future technology generations.”

For more information regarding the use of thinned dielectric diffusion barriers to scale RC delay, check out
About Novellus’ PECVD Technology:
For high-volume manufacturing applications at 45nm and beyond, Novellus’ advanced low-k, ILD, IMD, and dielectric diffusion barrier films offer the lowest k-effective, superior RC control, and an easily integrated low-cost dielectric solution.
About Novellus:
Novellus Systems, Inc. (Nasdaq: NVLS) is a leading provider of advanced process equipment for the global semiconductor industry. The company’s products deliver value to customers by providing innovative technology backed by trusted productivity. An S&P 500 company, Novellus is headquartered in San Jose, Calif. with subsidiary offices across the globe. For more information, please visit
# # #
Pushpita Prasad
Novellus Systems, Inc.
Phone: + 1 408/943-9700
Marla Kertzman
The Hoffman Agency for Novellus Systems, Inc.
Phone: + 1 408/975-3067
Domain: Electronics
Category: Semiconductors
Contact Person Address: Novellus Systems
Posted By: Juliet Araujo and Contact Juliet Araujo
Tuesday, November 14, 2017, Fairmont San Jose
170 S Market St, San Jose, CA 95113

Recent Press Releases

United States Fetal Bovine Serum Ind...

United States Fetal Bovine Serum Market Research Report Shown Distributors/Traders/ Dealers List in Global Market This report studies the Fetal Bovine Serum market, Fetal bovine

17 October, 2017

United States Energy Recovery Ventil...

This report studies the energy recovery ventilation system market; an energy recovery ventilator (ERV) is a type of mechanical equipment that features a heat exchanger combined w

17 October, 2017

United States ARM Microcontrollers M...

United States ARM Microcontrollers Market 2017-2022 Provide United States ARM Microcontrollers Introduction, it Analysis by Applications From 2017-2022 United States ARM Microc

17 October, 2017