Go to Page # Page of 6

Surface Measurement of Nonwoven with 3D Metrology

 NANOVEA | A Better Measure.
Description: The intended surface function of Nonwoven material (absorbency, repellency, resiliency, softness, strength, washability, filtering etc) require controlled surface characteristics such as roughness, texture and or dimensional consistency. As a result, accurate surface measurement and characterization are critical to the quality control of a Nonwoven material for their intended use.
Views: 1744
Domain: Electronics
Category: Business
Surface Measurement of Nonwoven With 3D Metrology

Prepared by Craig Leising
6 Morgan, Ste156, Irvine CA 92618 � P: 949.461.9292 � F: 949.461.9232 � nanovea.com
Today's standard for tomorrow's materials. � 2010 NANOVEA

Nonwoven material is fabric like but made from long fibers bonded into sheets or weblike structures by entangling fib ... See more

Stribeck Curve Analysis Using Tribometer

When lubrication is applied to reduce the wear/friction of moving surfaces an increasing load can shift the lubrication from several regimes such as Boundary, Mixed and Hydrodynami

25 August, 2011

Micro Fastener Measurement With 3D Metrology

Advances in Microelectronics, Biomedical and many others has grown the demand for micro manufacturing, or micromachining, of fastener components at smaller, more precise sizing on

25 August, 2011

Breakthrough Indentation Yield Strength Test

Nanovea today introduced its patent pending breakthrough method of reliably acquiring yield strength through indentation; ultimately replacing the traditional tensile testing machi

19 July, 2011